Black, adhesive, semi-fluid grease
specifically designed for lubrication of traction motor gear cases
of diesel-electric locomotives. Contains a lithium thickener, very
high viscosity base fluid and special EP additive system.
Traction motor gear cases (incorporating appropriate seal designs)
where semi-fluid grease type lubricants are specified
Older non sealed traction motor designs that normally use heavy
residual type gear lubricants, where the higher leakage rate that
may result is acceptable
Slow to medium speed industrial gear applications where an EP
semi-fluid grease is recommended
Usable temperature range in continuous service is -5 to 100C.
Approved against General Motors EMD Specification EMS 1045
High film strength and EP additive package protects
heavily loaded gears from wear and scuffing. Good low temperature
fluidity ensures that effective lubrication is maintained under
cold start-up conditions.
Long service life
Excellent oxidation resistance minimises thickening in
high temperature service, while high base oil viscosity and
adhesiveness reduce the tendency to leak from the gear case.
Enhanced equipment protection
Effective corrosion inhibitors protect gear components
from rusting in wet conditions.
ENVIRONMENT, HEALTH AND SAFETY
|Apparent Viscosity, Brookfield
| cP at 25°C (No 7 spindle, 4
| cP at 93.3°C (No 3 spindle, 4
|Oil Viscosity, cSt at
|Thickener (Lithium), %m%
|Timken OK Load, kg
Customers are encouraged to review this information, follow
precautions and comply with laws and regulations concerning product
use and disposal.
For further information on Caltex products and services call the
Lubelink Advisory Service on 1300 364 169 between 8.00 am and 6.00
pm (EST) Monday - Friday.
All reasonable care has been taken to ensure that the information
contained in this publication is accurate at the time of printing.
However, the information is liable to variation in the event of
subsequent changes in the blend, formulation, method of storage,
improper handling and usage etc.